Payment & Shipping Terms:
|Operating Supply Voltage:||1.8 V To 11 V||Output Current:||1.8 A|
|Minimum Operating Temperature:||- 40 C||Maximum Operating Temperature:||+ 85 C|
|Condition:||Original 100%,New And Original||Stock Status:||In Stock|
DRV8838DSGR Power Path Management IC Drivers 1.8A Low VTG Brushed DC Motor Driver
– Drives a DC Motor or Other Loads
– Low MOSFET On-Resistance: HS + LS 280 mΩ
– Logic VCC: 1.8 to 7 V
– DRV8837: PWM, IN1 and IN2
– DRV8838: PH and EN
– nSLEEP pin
– 8-Pin WSON With Thermal Pad
– 2.0 × 2.0 mm
– VCC Undervoltage Lockout (UVLO)
– Overcurrent Protection (OCP)
– Thermal Shutdown (TSD)
The DRV883x family of devices provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device can drive one dc motor or other devices like solenoids. The output driver block consists of N- channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages.
The DRV883x family of devices can supply up to
1.8 A of output current. It operates on a motor power supply voltage from 0 to 11 V, and a device power supply voltage of 1.8 V to 7 V.
The DRV8837 device has a PWM (IN1-IN2) input interface; the DRV8838 device has a PH-EN input interface. Both interfaces are compatible with industry-standard devices.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.
BODY SIZE (NOM)
2.00 mm × 2.00 mm
Contact Person: Sales Manager